Tire Pressure – Tips Before Traveling
Whether you’re going on a long drive or using your car on a daily basis, tire pressure is a really important thing to keep in mind. It is something that many people tend to overlook thinking that it is not important until the wheels are completely worn out and that is that taking them with bad pressure can cause some accidents and inconveniences.
That is why today we will talk about the recommended tire pressure so that you can enjoy safe driving. As they are the only point of contact between the car and the ground, you must take great care of this aspect and do a check every month to see that everything is correct and thus reduce the chances of an accident.
We are not only talking about their grip on the road, correct tire pressure offers a balance between fuel consumption, ride comfort and, above all, safety when braking.
Here you go for Milestar Patagonia MT Review
How to check tire pressure
The first thing to keep in mind is that each vehicle is different and the recommended pressure depends on each manufacturer. This depends on the type of vehicle you have since the tire pressure of an SUV is not the same as that of a sedan.
There is no single pressure for all cars, although it is generally recommended that a tire have a pressure between 2 and 2.5 bars. This tire will be within a normal inflation range. To know the recommended pressure of your vehicle, it has a reference sticker where it indicates the pressures recommended by the manufacturer. You can find this sticker on the driver’s door or on the fuel tank cover.
If you cannot find this sticker or it has worn out over time, you can always go to the vehicle manual where you will find all the necessary information about it.
Things to keep in mind about tire pressure:
The tire pressure of the front axle is usually different from the tires of the rear axle.
Your car can have more than one type of wheel mounted, so it will influence when putting one pressure or another.
You must increase the tire pressure of approximately 0.5 bar if it is more loaded than normal.
What you should do is go to a gas station to check the tire pressure of your car. There are some that offer the pressure gauges for free so you have no excuse not to check it out. What you should do to check the tire pressure is to do it before you start rolling and so the tires will be cold.
What happens if you increase the tire pressure more than necessary?
This can cause the contact surface of the tire with the asphalt to be less, causing the tire to wear more in the center area and its adhesion to decrease. Since the tire does not fully tread the asphalt, you will also be reducing safety when braking since there is less contact surface with the ground.
Look at the side of the tires as you will find the maximum tire pressure they can withstand and you should never exceed that amount. With very high pressure, they can suffer from deformation and even burst. It is important to look closely at the manufacturer’s recommended pressure to better ensure the conditions of your vehicle.
It is also not advisable to inflate the tire below the recommendation since the tread will have more friction with the ground and it will wear more along the sides of the tire.